# BphxEvaporator / BphxCondenser (Brazed Plate HX)

Config types: `"BphxEvaporator"`, `"BphxCondenser"`  
Source: `crates/components/src/heat_exchanger/bphx_evaporator.rs`, `bphx_condenser.rs`, shared geometry/correlation helpers

---

## EN

### Purpose & model

Brazed-plate HX with **geometry + two-phase correlation → h → UA estimate**, then runtime solve on an **inner ε-NTU** residual model.

#### Correlations (selectable)

Default **Longo 2004**. Also **Shah 1979**, **Shah 2021**.

Full registry (also Kandlikar, Gungor–Winterton, Gnielinski, Dittus–Boelter, Ko 2021, Friedel ΔP): see [correlations-and-maps.md](./correlations-and-maps.md).

Equivalent Reynolds construction (schematic):

```
Re_l  = G · d_h / μ_l
Re_eq = Re_l · (1 − x + x · √(ρ_l / ρ_v))
```

Longo-style Nu (illustrative forms used in the implementation path):

```
Evaporation:   Nu ~ f(Re_eq, Pr_l)     (e.g. 0.05 · Re_eq^0.8 · Pr_l^0.33)
Condensation:  Nu ~ f(Re_eq, Pr_l, ρ*)  (e.g. 1.875 · Re_eq^0.35 · Pr_l^0.33 · …)
h  = Nu · k_l / d_h
UA_est = h · A · z_ua
```

Pressure drop (schematic):

```
ΔP = z_dp · 2 · f · L · G² / (ρ · d_h)
```

**Important:** the **Newton system residuals** for the component are the **inner ε-NTU** residual set (`n_equations` of the inner model, typically 2 for the base HX path). The correlation updates **UA** (when `update_ua_from_htc` / geometry path is engaged); it is **not** a full multi-zone moving-boundary residual stack.

### Modes / targets

| Type | Mode | Notes |
|------|------|--------|
| `BphxEvaporator` | **DX only** | Outlet is superheated vapor. `target_superheat_k` (default 5 K) is diagnostic/target storage — not a flooded shell model. For flooded shell-and-tube use `FloodedEvaporator`. |
| `BphxCondenser` | Subcooling target | `target_subcooling_k` (default 3 K) |

### Ports

4-port Modelica-style naming in the system graph when wired:

| Port | Role |
|------|------|
| `inlet` / `outlet` | Refrigerant |
| `secondary_inlet` / `secondary_outlet` | Secondary fluid |

Geometry fields: plate length/width, thickness, chevron, channel spacing, optional `dh_m` / `area_m2` overrides.

### Calibration

| Key | Meaning | Default |
|-----|---------|---------|
| `z_ua` / `Z_UA` | UA scale | **1.0** |
| `z_dp` / `Z_dpc` | ΔP scale | **1.0** |
| `ua` explicit | sets `z_ua = ua / UA_nom` | – |

Legacy `f_ua` / `f_dp` accepted in JSON.

### JSON parameters (main)

| Key | Meaning | Default |
|-----|---------|---------|
| `n_plates` | plate count | 20 |
| `plate_length_m` / `plate_width_m` | geometry | – |
| `chevron_angle_deg` | chevron | 60 |
| `correlation` | Longo2004 / Shah1979 / Shah2021 | Longo2004 |
| `target_superheat_k` | DX target (evap) | 5 K |
| `target_subcooling_k` | SC target (cond) | 3 K |
| `refrigerant` / `secondary_fluid` | fluids | – |
| `z_ua`, `z_dp` | calib | 1.0 |

### DoF / system usage

Prefer live secondary wiring for closed loops. Pair `z_ua` free + measured SST/SDT for inverse calibration (same Fixed/Free discipline as other HX).

---

## FR

### But & modèle

Échangeurs **à plaques brasées** : géométrie + **corrélation biphasique** (Longo 2004 / Shah) → coefficient h → UA, puis solveur sur modèle **ε-NTU interne**.

Formes types :

```
Re_eq = Re_l · (1 − x + x · √(ρ_l/ρ_v))
Nu = f(Re_eq, Pr, …)     # Longo / Shah selon `correlation`
h = Nu · k / d_h
UA = h · A · z_ua
```

Le **Newton** ne résout pas la corrélation plaque par plaque : il résout le **HX ε-NTU** ; la corrélation **calibre/estime UA**.

### Modes

- **BphxEvaporator** : DX uniquement (pas un flooded shell).  
- **BphxCondenser** : cible de sous-refroidissement.

### Calibration

`z_ua = 1`, `z_dp = 1` par défaut. Alias BOLT `Z_UA`, `Z_dpc`.

### Ports / JSON

Voir tableaux EN.